月別アーカイブ: 2022年3月

Which are the benefits of laser light engraving

Wide range: CO2 lasers can engrave and lower just about any no metallic material. And it’s cheap!

Safe and dependable: Low speak to handling fails to cause mechanized extrusion or technical stress to the fabric. laser engraver machine,No ” blade represents”, no harm to the top of the workpiece no deformation in the fabric

Accurate and careful: the machining accuracy can get to .02mm

Constant result: be sure that the handling result of the same batch is utterly regular. Higher pace engraving and reducing can be carried out immediately based on the pattern production from the pc.

Low cost: not limited by the volume of digesting, for small batch digesting solutions, laser digesting cost less

 

like:

Features of Laser Engraving Technology

Finalizing features of laser engraving

Just what is the principle of engraving

カテゴリー: technology | 投稿者lovefang 17:40 | コメントをどうぞ

There are various varieties of elevators

Elevators are split up into three classes, such as traction and forced travel elevators, hydraulic drive elevators, panoramic elevator , escalators and transferring strolls.

Traction and compelled travel elevator: Grip identifies traction, the kind of movements of the elevator. The escalator could be transferred to and fro by traction.

Hydraulic driven lift up: refers to the lift up that presses gas in the tube from the hydraulic source of energy, definitely makes the plunger move in a direct line, and pulls the trolley to move down and up.

Escalators and transferring strolls: The escalators are composed of chain conveyors and belt conveyors in the stepped design and are used for passenger move on different flooring.

 

 

like:

What to pay attention to when buying an elevator 

What are the benefits of installing a sightseeing elevator 

What are the installation conditions for home elevators?

カテゴリー: technology | 投稿者lovefang 15:07 | コメントをどうぞ

Using and retaining children’s scooters

Avoid overloading, avoid use in water and environments with a lot of dust particles, avoid accidents, beatings and violent trampling.scooter manufacturer , The three-wheel swing car has extremely high technical requirements in terms of appearance and satisfaction.

 

The solidified size of the material is as small as a screw, and the quality is different from that of an ordinary car. It is specially made according to the specifications of sports goods.

 

The controls and midsection have only a slight angle, making it easy to drive. Lightweight and Durable PU Wear Resistant Elastic Big Tire with Flash for More Reliable Activities Basic Safety

 

like:

How old can a child be on a scooter 

What toy car should a two-year-old buy 

What is the role of a walker

カテゴリー: hobby | 投稿者lovefang 14:53 | コメントをどうぞ

What should be paid attention to in laser marking:

1. It is strictly forbidden to start the laser power supply and Q-switched power supply when there is no water or abnormal water circulation; if there is any abnormality,Laser Marking Machine , turn off the galvanometer switch and key switch first, and then check again;

 

2. No-load operation of Q power supply is not allowed (that is, the output end of Q switching power supply is suspended); before the krypton lamp is lit, other components must not be started to prevent high voltage from entering and damaging the components;

 

3. Pay attention to the suspension of the output end (anode) of the laser power supply to prevent breakdown from other electrical appliances; keep the internal circulating water clean. Clean the water tank regularly and replace it with clean deionized or purified water;

 

4. Pay attention to the use and replacement of krypton lamps. When replacing a new krypton lamp, the value of the laser power ammeter during normal marking must be recorded as the standard current value. When the krypton lamp is gradually aging, increase the current output of the laser power supply, but the value of the ammeter should not exceed 1.25 times the standard current value.

 

like:

Using a laser marking machine has the following benefits: 

What materials can the laser marking machine mark? 

Exactly what is the basic principle and function of laser light marking

カテゴリー: technology | 投稿者lovefang 16:09 | コメントをどうぞ

What are the commonly used consumables for metal castings

Widely used resources will be the subsequent four: zinc alloy, aluminum alloy, die casting company , the mineral magnesium alloy, copper alloy.

Their features and uses are the following: Number of employs Large volumes of castings which require electroplating on their surfaces Zinc alloys are prone to growing older, dimensionally unpredictable at temperature ranges >100°C or <-10°C, and also have restricted program variety and so are the most widely used.

Common app castings with lower solidity and excellent mechanical attributes are used for components that can withstand strong bumps and slow-moving vibrations parts which can be used for lower temperature (above -196°C) job can be used for anti-magnet components, dress in-resilient parts, very good energy conductivity, right after warming Components with tiny dimensional modifications.

 

like:

How to identify the characteristics of inferior aluminum profiles

What are the application scope of die casting process

How to identify the characteristics of inferior aluminum

カテゴリー: technology | 投稿者lovefang 17:26 | コメントをどうぞ

What are the classifications of external sound cards

An external sound card, usually called a USB sound card. A built-in credit card that appears to be different from the motherboard, usb external sound card , or a noisy card connected to the motherboard through PCI, ISA, PCI-E, etc. interfaces.

Much like built-in sound cards in PCI programs, USB sound cards are also different from soft and hard sound cards.

The additional USB sound card is actually the same as the motherboard integrated soft noise card, but since the external sound card can use better CODEC than the motherboard built-in, and can add new circuits, the external sound card can obtain better sound quality through additional functions.

Like the high-level sound card with PCI interface, the additional high-level sound card is also equipped with its own unbiased music processing chip. The main difference between it and a challenging sound card that uses a PCI user interface is that another process user interface software is required to send audio information using a USB sound card.

 

like:

What are the classifications of external sound cards 

Do I need a sound card to sing?

What exactly can a USB sound card be used for?

 

カテゴリー: hobby | 投稿者lovefang 18:29 | コメントをどうぞ

Where to use self-heating knee pads

In recent years, more and more people have purchased self-heating knee pads for home care. Do you know where self-heating knee pads are suitable for use? home care equipment,Can it be used normally?

 

Effectively protects legs and knees from sprains, contusions and frostbite.

Effectively relieve joint pain.

Effectively improves bruising, swelling and pain caused by soft tissue injuries.

Effectively improve the symptoms of synovitis, arthritis and varicose veins.

 

like:

How long are the thermal knee pads recommended for daily use? 
What do self-heating knee pads do? 
Precautions when using self-heating knee pads 

 

 

カテゴリー: health | 投稿者lovefang 12:24 | コメントをどうぞ

The visible difference between industrial camcorders and SLR video cameras

The biggest distinction between both may be the placing of consumers. Manufacturing camcorders are mostly geared towards bulk industrial apps, although SLR digital cameras and cellphone cameras are geared towards ordinary consumers. camera news, Accommodating customization of business digital cameras is mirrored in software program and hardware.

application

Virtually all commercial camcorders feature a software program improvement set. The SDK consists of features to manipulate all variables in the digital camera. Whenever we create the digital camera application software program, we include the SDK to the software, and by getting in touch with the given features, we can completely handle the particular parameters from the commercial video camera.

SLR cameras normally only give change of standard capabilities, such as impression quality, shutter rate, gain, and many others., along with the above guidelines are set by handbook switches, normally there is not any automatic encoding management user interface.

hardware

Industrial cameras in addition provide an abundance of modification place when it comes to components, such as zoom lens program, information program, look sizing, high and low temperature efficiency, water-proof and dustproof functionality, and so on., and in many cases their particular look may be custom-made based on genuine requires.

 

like:

What is an embedded camera? What are the advantages 

What is an embedded camera? What’s the function 

How to choose the focal length of the camera?

カテゴリー: camera | 投稿者lovefang 12:13 | コメントをどうぞ

Preventing e cigarettes from exploding?

1. Utilize the authentic charger to demand, take notice of the asking standing and time. Usually do not depart the electric cigarette inside the charging you express overnight, and cost it in accordance with the time specified within the instructions guide. electronic tobacconist,In case the battery begins to get popular, change it out in time.

2. Please do not use electronic cigarettes although charging. For refillable electric cigarettes and disposable tubes, tend not to modify or disassemble the merchandise at all. When the battery power is broken, leaky, or wet, usually do not utilize the battery power and dispose of it appropriately. Or contact the company over time.

3. Attempt to opt for an electronic tobacco cigarette brand name, and take note of recognize regardless of if the electric cigarette is legit or not when selecting. Imported items has to be formally qualified, in order to steer clear of failing to guard proper rights after an accident.

4. When the weather conditions are warm, will not placed the smokeless cigarette inside a shut space, including in the vehicle, pocket, and many others., observe the temperature dissipation of the smokeless cigarette.

 

like:

How to identify the taste of electronic cigarettes

Do e-tobacco explode? What is the result in?

What to Consider When Buying Electronic Cigarettes?

カテゴリー: health | 投稿者lovefang 12:55 | コメントをどうぞ

Several aspects to be considered in CNC lathe processing

The geometrical conditions that make up the contour of the part

During the manual programming of the turning-milling CNC lathe, the coordinates of each node should be calculated; during the automatic programming process,  metal cnc machining,all the geometric elements that constitute the contour of the part should be defined.

 

Dimensional Accuracy Requirements

Analyze the requirements of the dimensional accuracy of the part drawing, determine whether the lathe process can be achieved, and determine the process method to control the dimensional accuracy. When using CNC lathe parts, it is often programmed with the average value of the size and limit dimensions of the required parts. size according to.

 

Surface Roughness Requirements

Surface roughness is an important requirement to ensure the microscopic precision of the part surface, and it is also the basis for the rational selection of turning-milling CNC lathes, tools and a certain amount of cutting.

 

Data and Heat Disposal Requests

The data and heat treatment requirements given on the part drawing are the basis for selecting tools, CNC lathe models, and determining the amount of cutting.

 

 

like:

What are the hardening factors of CNC lathe machining? 
Design points of CNC machining 
Material Requirements for Precision Parts Machining 

 

 

カテゴリー: cnc | 投稿者lovefang 13:21 | コメントをどうぞ