As a surface modification technology of metal materials, laser cladding can effectively change the hardness, wear resistance, corrosion resistance and high temperature resistance of metal surfaces. For more than half a century, the technology has been continuously improved and developed in practical applications. In addition to materials and processes, high power laser pointer and powder feeding technologies have been continuously upgraded. In the 1980s and 1990s, cladding lasers were mainly CO2 lasers and YAG lasers. After 2010, semiconductor lasers (both direct output and fiber coupled output) appeared. In recent years, fiber lasers have begun to compete for the cladding market of semiconductor lasers.

At the same time, people are constantly exploring ways to improve the function of powder and laser, and invented a variety of powder feeding techniques, including preset powder feeding, side-by-side feeding and center feeding. The preset powder feeding adopts the powder laying or gravity powder feeder to preset the powder on the path through which the spot passes. The preset powder feeding technology is simple, the powder feeding process has no powder splash, the powder utilization rate is high, but the versatility is not strong. The side-by-side powder feeding adopts pneumatic method to send the powder into the spot, the side-by-side powder is divided into asymmetric side feeding powder and symmetric coaxial feeding powder, and the side feeding powder is easily affected by the moving direction, and the cladding quality is relatively high. difference. Coaxial powder feeding has good quality and versatility. Coaxial pneumatic powder feeding is a “powder-packing” technique that uses a multi-beam converging powder stream or a ring-shaped converging powder stream to surround the central military laser pointer beam. The center powder feeding is also a pneumatic powder feeding method. It is a kind of “optical powder coating” technology, which is designed to surround the center powder flow by designing a hollow beam.

Ultrafast lasers concentrate light energy in picosecond to femtosecond time intervals and focus light into areas of ultra-fine space that are smaller than the diameter of the hair, making the intensity of the electromagnetic field stronger than the force of the nucleus to its surrounding electrons. It is several times higher, and many other methods that do not exist on the earth can not achieve extreme physical conditions. At the same time, the laser energy is concentrated in such a short period of time, and a huge single pulse energy and a very high peak power are obtained. The high power density laser pulse can easily strip the outer electrons, and the electrons are separated from the atoms and form a plasma. .

Since the interaction time between the laser and the material is extremely short, the plasma has not been able to transmit energy to the surrounding material, and has been ablated from the surface of the material, which can largely avoid the melting of the material due to the long pulse width and low intensity astronomy laser pointer. And the continuous evaporation phenomenon (heat effect) ensures that the surrounding materials in the space range involved are not affected during the processing, and the processing quality is greatly improved. Ultrafast laser processing is therefore also referred to as “cold processing.”

In addition, the non-contact processing of the laser can avoid the problems of chipping and cracking in the traditional machine-added cutting, high precision, no micro-cracking, chipping or chipping problems, high edge crack resistance, and edge maintaining optical performance. It does not require secondary manufacturing costs such as rinsing, grinding, polishing, etc., and reduces the cost while greatly improving the workpiece yield and processing efficiency.

In recent years, high-speed laser cladding as a new laser cladding technology has attracted widespread attention in various industries such as coal mines, steel, petrochemicals, and electric power. Recently, Zhongke Zhongmei successfully used powder feeding in high-speed green laser pointer cladding technology. They used multiple lasers to wrap the center powder, and the powder melted on the molten pool and fell into the molten pool.

Compared with the coaxial pneumatic powder feeding, the central powder feeding is characterized in that the powder is a single powder flow, and there is no mutual impact scattering of the powder flow in different directions. In addition, in the vertical down-cladding process, a lower powder feed pressure can be used, so that on the one hand, the powder flow rate is relatively slow, the powder and the laser act for a long time, and the powder is more easily melted over the molten pool. On the other hand, the lower powder flow rate also reduces the ejection between the powder flow and the substrate. The practical application shows that the splash of the high-speed cladding cladding process in the center powder feeding is obviously reduced, the spark is quite gentle, and the powder utilization rate is greatly improved.

As an important part of additive manufacturing technology, laser cladding technology is a new advanced green manufacturing technology that replaces traditional surface treatment technology. The utility model utilizes a high-energy waterproof laser pointer as a heat source, simultaneously melts the high-performance powder and the base material of the part, and forms a surface cladding layer with wear resistance and corrosion resistance on the surface of the part, which not only improves the use performance of the parts, but also prolongs the service life by two. three times. Laser cladding technology is mainly used in the surface treatment of large high-value parts, especially in the surface treatment of large iron-based rotary parts. At this stage, the related technical processes have become mature for the cladding processing of the outer surface of the part, and a wide range of applications have been realized. However, the laser cladding process for the inner wall of the part, especially the inner surface of the thin-walled part, has been the bottleneck of the application of this technology.

Laser soldering is a laser welding technology in which a laser is used as a heat source to melt solder paste. The main feature of laser soldering is the use of high energy of astronomy laser pointer to achieve rapid heating of local or tiny areas to complete the soldering process. Laser soldering is compared with conventional SMT soldering. Has an irreplaceable advantage.

Traditional SMT technology, that is, surface mount technology, mainly uses wave soldering and reflow soldering technology. There are some fundamental problems, such as lead wires of components and pads on printed circuit boards, which will diffuse Cu, Fe, and molten tin. Various metal impurities such as Zn; molten tin is likely to generate oxides at high speed in the air. At the same time, in the traditional reflow soldering, the electronic components themselves are heated to the soldering temperature at a large heating speed, causing thermal shock to the components, and some thin package components, especially heat sensitive components, are destroyed.

At the same time, due to the overall heating method, PCB boards and electronic components have to undergo the process of heating, heat preservation and cooling, and their thermal expansion coefficients are different. The alternating heat and cold are easy to generate internal stress inside the components, and the internal stress exists. The fatigue strength of the solder joint is reduced, and the reliability of the electronic component is damaged. In addition, the excessive heating time of the overall heating method is liable to cause coarse metal grain of the weld metal and excessive growth of the intermetallic compound, thereby reducing the fatigue life of the solder joint. 532nm laser pointer soldering is a reflow soldering of local heating, which can well avoid the above problems.

Advantages of laser welding: Laser welding can achieve high quality joint strength and large aspect ratio, and the welding speed is faster. Since laser welding does not require a vacuum environment, remote control and automated production can be achieved through lenses and optical fibers. The laser has a large power density, has a good welding effect on difficult-to-weld materials such as titanium, quartz, etc., and can weld different performance materials. Micro soldering is possible. The laser beam is focused to obtain a small spot, and can be accurately positioned, and can be applied to the mass welding of micro- and small-sized workpieces produced by large quantities.

The military laser pointer beam can be focused to a small spot diameter, and the laser energy is confined within a small spot range, which can achieve strict local heating of the soldering part, and the thermal shock effect on electronic components, especially heat sensitive components, can be completely avoided. . The laser has a high energy density, a high heating and cooling rate, a fine metal structure at the solder joint, and an effective control of excessive growth of intermetallic compounds.

The input energy of the welded part can be precisely controlled, which is very important for ensuring the quality stability of the surface assembled welded wire joint. Since the laser welding can only heat the welded portion, the substrate between the leads is not heated or the temperature rise is much lower than the welded portion, which hinders the transition of the solder paste between the leads. Therefore, the occurrence of bridging defects can be effectively prevented.

The laser solder paste soldering process is divided into two steps: first, the green laser pointer solder paste needs to be heated, and the solder joints are also preheated. The laser solder paste used for soldering is then completely melted, and the solder paste completely wets the pads, eventually forming a solder. Due to the use of laser generators and optical focusing components for soldering, high energy density, high heat transfer efficiency, non-contact soldering, if the solder uses a common SMT solder paste, it will produce tin, splash, solder balls, wettability, etc. .

Laser cutting machine industry has developed quite rapidly in recent years. From the initial YAG equipment and CO2 equipment to the current fiber, from low-power fiber to the current 10,000-watt fiber, which shows that our blue laser pointer technology continues to improve, and now the price of laser cutting equipment compared with previous years To be much cheaper, this is a very delightful thing for friends who want to buy equipment, no matter what the industry can afford the laser, afford to use the laser.

For the majority of customers, the purchase of equipment will shop around, so the competition among peers is bound to be ultimately! Nothing more than the concern of people who buy equipment, in addition to configuration, is the price and after-sales service, which is also the competition of major manufacturers. Price competition, the most common peer competition. When you consult the same piece of power equipment, there may be tens of thousands or even hundreds of thousands of price difference between the price. When it comes to configuration and technology, many people might say that the lasers are all for others, and for those of you who are just assembling them together, you do not need any technology at all. Yes, in appearance, this is indeed the case. So many people think that the green laser pointer cutting machine industry threshold low, high profits, just a few people can pull a few. However, how much is done and how much is sold.

Grasp the rules of laser cutting machine processing factors on the processing of surface quality, you can find ways to improve the surface quality of the process measures to improve the quality of the processing surface. When the laser is cutting the sheet at high temperature, the traces of the molten material do not appear in the notch below the vertical laser beam, and instead, it is ejected at the rear of the laser beam. As a result, the curved lines are formed at the cutting edge and the lines closely follow the moving laser beam. In order to correct this problem, the feed rate is reduced at the end of the cutting process and the formation of lines can be substantially eliminated.

The cutting width generally does not affect the quality of the cut. The cutting width has an important influence only when a particularly precise profile is formed inside the part because the cutting width determines the minimum internal dimensions of the profile. As the thickness of the plate increases, the cutting width also varies with Increase. So you want to ensure that the same high precision, regardless of the width of the incision, the workpiece in the high power laser cutting machine processing area should be constant; when the material thickness of more than 18mm, the cutting edge of the verticality is very important; away from the focus, the laser The beam becomes divergent, depending on the position of the focus, the cut becomes wider toward the top or bottom. Cutting edge deviation from the vertical line a few millimeters, the more vertical edge, the higher the cutting quality.

The heat-affected zone refers to the laser cut where the area along the incision is heated. At the same time, the structure of the material itself changes. For example, some materials can harden. Heat affected zone refers to the regional structure of the internal structure changes due to high temperature; and depression and corrosion of the cutting edge of the surface has an adverse effect on the appearance of laser cutting machine. They appear in the general should avoid the cutting error; Finally, if the cutting makes the part heated rapidly, it will be deformed. This is especially important in fine workmanship, where the contours and tabs are usually only a few tenths of a millimeter wide. Controlling laser power and using short 500mw laser pointer pulses can reduce the risk of heat build-up and avoid distortion.

As said above, there are many manufacturers, the equipment sold out is very cheap, of course, with spare parts and machine tools are poor. Such manufacturers generally do not have a long-term strategic plan of sustainable development, there is no core technology. What they do is some low-end things, simple assembly is also OK, if they let them study some high-tech stuff, there is no professional talent, to give him the same configuration of components, they also create good equipment. In addition to a laser device, the machine tool is also important, the same laser, different manufacturers to make the device, and some can use for years without any major problems, but some day-to-day problems.

High-brightness fiber laser processing of high thermal conductivity material, it is best to use a small spot to maintain the stability of the welding hole, but this processing may make the process is too intense, resulting in a large number of welding splash. Experiments show that high-brightness laser pointer with high-speed positioning of the remote scanning head, significantly reduce the welding splash, which is achieved by beam swing to ensure that the welding hole stability to achieve. Welding copper, aluminum, if you do not use the beam swing mode, welding splash will be very serious. Once the high-frequency swing beam is used, the splash will be reduced. By installing a protective device, to avoid damage to the equipment by the back light. Processing of copper and aluminum such high reflective metal, the return light is inevitable, the traditional laser due to the natural sensitivity of the return light, may lead to processing instability and destructive automatic shutdown, or even scrapped.

Conventional fiber lasers use fiber-coupled technology to couple multiple beam outputs together, resulting in lower brightness of the output laser. The new generation of fiber lasers uses an innovative architecture that combines the pump diodes and drivers into separate pump modules. The gain fiber is mounted in a configurable gain module that can output more than 8kW of blue laser power. The gain module is based on the novel main oscillator / power amplifier (MOPA) design, enabling high-brightness laser output. In addition, the Ennie laser also uses a reliable integrated backlash isolator to protect all modules from the impact of backlit light, can be high anti-material full power, uninterrupted, stable processing. These two technological innovations play a vital role in RLS applications.

If the servo motor parameter error affects the cutting quality, then the guide rail and screw accuracy error will directly lead to round hole accuracy is less than expected. This is related to the strength of laser cutting machine manufacturers, usually, some small factories will deceive customers that laser cutting machine accuracy can reach 0.1mm, but in fact, in the actual operation of the process, will make the laser punch quality and effect are not Good, affect product added value. So choose high quality and choose a large brand of laser cutting machine is very necessary. All of these parameters used to identify the accuracy of cutting the hole, speed, etc. parameters are met the requirements of the standard, are sufficient to identify the quality of the laser cutting machine purchased.

In certain cases, it is necessary to remove graphite and lithium metal oxides to reveal bare copper or aluminum foil labels. The key to this step is to remove the coating material without compromising the underlying metal foil. Pulse infrared green laser is best suited for this link. Similar to aluminum foil cutting, the cover film should also be cut into the desired shape with reference to the battery design. Because the isolation membrane is composed of organic compounds, pulsed ultraviolet laser is the most suitable choice. Lithium battery because of its excellent performance, is widely used in electronic consumer goods, motor vehicles and energy market, its production technology innovation is particularly important.

The use of fiber lasers as a source of light in many industrial laser systems on the market helps to ease service and reliability issues. Fiber lasers are energy-efficient, easy-to-replace and easy-to-maintain devices that are cost-effective in manufacturing environments. Long-term reliability is the main driving force for upgrading fiber laser mounting to one-third of all industrial laser sales.

The Chinese government also hopes to make breakthroughs in intelligent manufacturing, improve supply quality and efficiency, stimulate actual demand, strengthen new growth momentum, focus on manufacturing innovation and information and manufacturing technology integration, enhance information technology and high-end equipment, promote robotics and intelligent systems The development of all this directly or indirectly related to industrial red laser pointer technology. If these goals are achieved, it is expected to enhance the competitiveness of Chinese enterprises in the global market.

In this study, a cadmium sulfide (CdS) line with a diameter of 204 nm and a length of 15 μm was used as the core design of the optical cavity (Fig. 1). The high refractive index of the nanowires causes the incident light to have a high reflectivity factor at the end face and be guided by the nanowires. This arrangement forms the Fabry-Burrow cavity, which, when activated by an external light source, forms a laser. The blue laser wavelength thus formed depends on the refractive index around it. By measuring the wavelength of the laser output, the refractive index of the liquid immersed in the nanowires can be determined.

There are a variety of methods for surface nanocrystallization of materials. There are a large number of surface nanocrystallization technologies. It is a surface layer which can realize the nano-characteristics by means of laser surface treatment technology and nanometer technology. It can be collectively referred to as laser surface nanocrystallization technology; More generally referred to as laser nano-surface engineering technology, is directly or mainly the use of laser this specific technical means to directly change or add material to change the surface of the solid material is treated, the composition or structure, so that the formation of nano-crystal Grain or a certain nanoparticle composition of the surface layer. Or the use of high power laser etching, laser embossing, laser hair, laser micro-nano modeling and other means to achieve nano-structure on the surface of the material.

Laser shock peening (LSP) is a kind of high and new technology to improve the fatigue, wear resistance and corrosion resistance of metal materials by using plasma shock wave produced by laser beams. The impact of laser surface nanocrystallization technology as shown in Figure 6, when the short pulse (NS) high power density (GW/cm2) of the laser irradiation to the metal surface absorption layer, absorbing layer to absorb laser energy explosive vaporization, high pressure (GPa) plasma, the plasma is constrained layer constraint, produce high impact wave effect on the metal surface and to the internal communication, the formation of dislocation structure dense and stable on the surface of the material, plastic deformation by dislocation slip, and the shock wave at the grain boundary reflection and refraction, the shock wave in multi direction effect on grain, thus the complexity of the dislocation slip, agglomeration and annihilation after the formation of new grain boundary, sub grain formation and smaller nanocrystals.

Air cutting: the advantage is very low processing costs, only need to consider the green laser pointer itself and air compressor electricity can be, without the need to produce high auxiliary gas costs, and cutting efficiency in the sheet can match the nitrogen cutting, is a kind of economic And efficient cutting method. But the shortcomings in the cutting surface is also obvious. First of all, the air cutting section will produce the bottom of the burr, laser processing products must also go through the deburring and other secondary processing, is not conducive to the entire product production cycle. Second, the air cutting section is easy to black, affecting the quality of the product. Therefore, the green laser pointer processing without the need for follow-up can not be reflected, so in the galvanized steel for the processing, many companies are reluctant to choose the way of air cutting.

At present, the stainless steel laser cutting machine with its beam of good quality, high precision, small slits, smooth cut, flexible cutting arbitrary graphics and other characteristics are widely used in metal processing industry, decoration engineering industry is no exception, the following we look at Look at the application of stainless steel laser pen cutting machine in decoration industry.

Laser cutting system is constantly improving the high-tech, information technology, relative to the traditional mechanical manufacturing technology, another revolution, the stainless steel decoration industry has produced a huge role in promoting. With the increasingly fierce market competition, the technology will play an increasingly important role, and bring huge economic benefits.

For some blue laser types with a narrow gain bandwidth, single-mode output is achieved with a very short resonant cavity.Operating a nanosecond-pulsed laser is substantially different from operating a CW laser.There are no wavelength filters hidden in the head to separate the laser wavelengths.

With the dramatic growth in the application of blue laser in everyday activities.Laser emission is similar to direct sunlight exposure in that the light arrives at the eye in parallel rays.Each of the wavelengths used in therapy lasers interacts with tissue in a unique way.This wavelength is also very popular because superpulsing the laser eliminate the risk of eye damage.

The 200 W beam that enters LIGO’s interferometers begins inside a high powered laser diode.It presents a look at the major commercial laser lines, the wavelengths they produce, and their many applications.The laser cavity, or resonator, is at the heart of the system.Multi frequency lasers are used for a variety of applications, including various types of spectroscopy, laser microscopy.

The world’s first high powered laser came into the world on May 16, 1960, a little over 50 years ago.The manipulation of the output wavelength of an optical device such as a laser.NPL is the home of the frequency-stabilised lasers that provide the practical realisation of the metre within the UK.For frequency metrology in telecomms near 1550 nm, traceability is provided via one of NPLs acetylene-stabilised lasers.

To amplify the seed beam, the molecules in each rod are first energized by shining separate 808 nm green laser into each rod.Real laser beams somewhat deviate from this ideal behavior.However, even a single laser line actually covers a range of wavelengths.The red laser penetrates through nuclear sclerotic cataracts and moderate vitreous hemorrhages better than lasers.

Ultra-stable, high precision quantum cascade green laser drivers, laser diode drivers and temperature controllers are available.Some other commonly used lasers, classified by type of lasing material, and their emission wavelengths include.Laser diodes are often tuned via the temperature.Single-frequency laser can be tuned within approximately one free spectral range of its resonator.

When you select a Red Laser you are simply telling the power meter which point on the sensitivity graph it should take into account in order to give you the accurate laser power measurement.The laser manufacturer is required to certify that a laser product falls into one of the categories.The following summary table compares the wavelengths of various cold lasers.

1. http://lasernzh.exblog.jp/27636050/
2. http://lasernzh.bcz.com/2017/03/13/multi-line-lasers-emit-several-different-wavelengths/

The SaberForge team also made a series of cool laser sword belt, belt buckle, laser sword frame, T-Shirt, Cosplay and other peripheral products posters.For the fans, completely unable to resist Adaptive Saber Parts laser sword.With your laser sword, back rate is not generally high.Adaptive Saber Parts (ASP) launched on Kickstarter to raise the public got the support of the 353, raised to $122474, have exceeded their financing target of $100000, all the chips from the end of the project .

Adaptive Saber Parts is the burning laser sword suit, including a large number of different design image of the laser transmitter, pommel, body, light blade, light blade plug, a series of different kinds of LED lamps, a motion detector, sound board, battery charger, switch box, metal and so on, in order to let users have more choose, create their own laser sword.

What is Adaptive Saber Parts?

The high powered laser sword appeared at Star Wars movie, Jedi used a civilized era weapons.Its cool appearance attracted numerous fans, their laser sword obsession is not less than the original works of love.A team from the United States launched the SaberForge Adaptive Saber Parts, so that everyone can create high quality laser sword.

Pick Up Your Laser,Let’s Play A Sword!

A basic ASP package includes a Laser Sight transmitter, making the pommel handle, handle body, light blade, blade light plug and a plug element set (12W LED lamp, battery box, battery charger, metal switch).This set of ASP priced at $150 (about 930 yuan), ASP with a sound package priced at $350 (about 2172 yuan), if everything goes smoothly, is expected in November 2017 will be shipped.

SaberForge team will provide more than one hundred unique metal parts, you can design a variety of different kinds of 300mw Green Laser sword.In addition, the SaberForge team will release a new expansion part each month, create unlimited possibilities.We will also provide a variety of plug and play, no electronic components to be welded, easily upgrade your laser sword, such as LED lights, motion detector, voice board.We provide a multicolor LED, white, blue, orange.

1. http://www.localtalentconnect.com/blogs/item/how-about-russia-laser-weapon
2.  
3. http://www.devote.se/htpow/the-birth-of-laser-weapon-system–30542804

The technical difficulty to reach these requirements is quite large. If we can improve the output power of the 100mw Laser Pointer , we can reduce the development difficulty of the tracking device and the focusing mirror. In addition, researchers have improved the laser size using optical sighting the target, and hit the target multiple sites. This kind of design thought to facilitate the focused beam, reduces the requirements on the beam quality, thus reducing the complexity of the system.

Laser pointer weapon power

High energy burning laser weapons are mainly composed of high energy laser, precision tracking device and beam control system. The key technology of high energy laser weapons development are power, excellent beam quality of the laser, precision tracking device, light weight and anti radiation beam launch control system, laser beam radiation to the target.Laser weapon power, beam quality and focusing mirror size of laser weapons might play decisive role. At the same time, in order to ensure that the laser beam hit to stay for a period of time, to deposit enough energy to kill a target and demanded to aiming device of high accuracy of micro level, require high precision control of beam.

From the point of view, the development of the world’s most powerful laser pointer in the world will become one of the main weapon in future war, its application scope will be expanded, including against enemy ballistic missile, satellite and goals.I like the sights and eye relief is good especially for the price. I just put the batteries in just before writing this review and the laser is not working. At this moment I do not know if it’s the laser unit or just a bad battery. I’ll check it and update my review another day soon. Otherwise the scope seems well built and is very cool. I bought my wife an AR15 for her birthday along with this scope. She loves the “tactical” look. If I simply have a bad battery then I will recommend this scope..if it’s a bad laser I’ll let you know what kind of service I get and rate it then. Good shooting and God Bless America!
So my original review was good but I had a problem with the Laser Sight . Turned out to be my fault and was only a battery issue. The scope works well. I was particularly impressed with the seller who promptly emailed me after reading my review and offered their assistance and assurance that they would stand behind their laser sight . I love this scope and I really appreciate the company values. I look forward to buying another laser pointer soon. I plan to mount 45 degree angle sights on my AR.

Reviews on laser sight weapon

This green laser is really very bright, sharp and visible out to long distances. It is true that there is no power adjustment, so if this is really important to you because you want to use it indoors at night for example, considering how bright it is, you may want to consider a different product, although you still might be happy with it even for that use, as I am. We’ll see over time how well it holds up, but considering how well built it feels and how well it performs, I’m guessing this is a product that is made to last. I couldn’t be happier with my purchase, or should I say purchases because I just ordered two more!

1. http://htpow.publicoton.fr/different-kinds-of-laser-weapon-system-801204
2. https://htpow.userecho.com/topics/4-laser-weapon-defense-system-history/

Chinese Laser weapon

Laser weapon is the most likely ones to be used in the actual combat, and it has a very important role in the future war! At present, the highest level in the world is the United States and russia. For semiconductor lasers for military optical fiber communications in the mid 1960s began to develop, in 20 years China has developed a CO2 laser, burning laser pointer , fiber ring laser, steady frequency laser, far infrared laser, Wang Daheng in 1974 led a delegation visited the United States and Canada, strong domestic laser device is introduced in this paper has been hit, the neutron, impressive and Chinese experts said the two countries have been at the same level.

1986 Polish built carbuncle peak power more than 1012 w intense pulsed laser test device, general Zhang Aiping named “Shenguang” China new generation fly Maio ultrashort ultraintense laser device has been in 1996 by the Shanghai ray machine is developed successfully, and passed the acceptance, which is a symbol of China’s strong laser technology and embarked on a new level. China had made greater progress in the field of an intense laser weapons(such as the 5000mw Laser Pointer ) and possesses the preliminary production ability, then China may has the capacity to threaten coastal activities for the United States, “Aurora” super high-speed strategic reconnaissance aircraft.

Powerful airborne laser weapon system

One of the most notable is the high power airborne laser weapon system. 603 is responsible for formulating construction scheme of the airborne laser weapon, The development of combat command system and a series of other related airborne systems, installation of Laser Sight weapon components, according to the needs of the military refit transportation (transport) platform, but also of each subsystem integration. Among these, one of the most important components is the firing control system. In addition, the company will also host the construction of a strong laser ground support system. In order to implement the construction plan of the airborne laser weapon system, and to compile the system program for the automatic control of the laser weapon.

Chinese experts believe that the airborne laser weapon system must be able to independently find, identify and destroy incoming ballistic missiles, cruise missiles and various types of aircraft within 400 km. According to the plan of Ministry of Chinese Air Force Commander, equipped with laser weapons of the aircraft will be mainly used for patrolling security area of the 100 km away from the front line, after the capture of airpower. The position will move toward the more close to the front of the local. According to the Chinese air force estimates, to ensure that the 24 hour patrol in the area of the missile threat and the implementation of continuous monitoring of the enemy, at least 5 equipped with a new aircraft equipped with organic 200mw Laser Pointer weapon system.

In order to ensure the operational effectiveness of airborne laser weapon system, in the base of these standing will store plenty of aviation fuel and produce strong laser beam of chemical reagents. Each set of airborne laser weapon system includes: a frame by Boeing Y8-600F modified large fixed wing aircraft, a composed of 14 components of infrared laser generator and a set of operational command system, a composed of a variety of active and passive photoelectric detection and tracking devices of firing control system, and guidance system and some support equipment. Because of the laser weapon system equipment, the shape is also very special — the nose fairing is designed into the spherical, below the installed emission device. According to the Chinese air force, the installation of the YAL-1A on the focus of the lens to reach 1.5 meters in diameter.

1. http://lasernzh.blogcu.com/mbda-high-power-uav-laser-weapon-system/23177376
2. http://lasernzh.hatenablog.com/entry/2016/08/01/210219

According to the Russian satellite network reported that the U.S. Navy recently announced that in the Persian Gulf, the “LaWS” amphibious ship on the 5000mw Laser Pointer weapon system successfully passed all tests. It has been on duty since December 2014. The power of the system is still very low. Technology strategy and analysis center of Russian Kashin experts pointed out that laws can only deal with small without man-machine or boat, with Russia and other countries similar weapons is almost the same.

The American army’s burning laser weapons can only make the boat become hot, so that the engine failure. In order to deal with the UAV, it needs to use a laser to the UAV a key part of the irradiation for a few seconds. The article believes that the United States in the main results of the laser weapon is only performed in the country, it is the first to install laser weapons on the actual warships. System itself does not have a revolutionary, with other countries, including China and Russia, similar weapons samples is almost the same.

China Physical Engineering Research Institute has recently demonstrated similar to the LaWS 300mw Green Laser weapon system low altitude guards”. It successfully shot down unmanned aerial vehicles. The laser defense system Chinese tanks can be blinding the enemy soldiers. The use of laser weapons to destroy small unmanned aerial vehicles, as compared to a missile or projectile, is considered to be a promising prospect because of the low cost of energy required for each launch. But also need to take into account the high cost of laser equipment itself. The effectiveness of the laser weapon will decrease with the deterioration of the weather conditions. The enemy can make difficult for the use of laser weapons, for example, through the production of aerosol smoke to protect the target, or in the design of a missile or aircraft, the use of specialized heat resistant materials.

In 1980 the Soviet Union installed on “Dixon” the ship of the shipborne 1000mw Laser Pointer device “Aida Seoul” conducted emission test. Later “akevlon” test device successfully destroyed a low altitude missile. Many weapons tests in the Soviet era were interrupted by the collapse of the Soviet Union, but in the beginning of this century, Russia was fully restored. Russia “is the famous Sokol-Echelon laser weapon” was installed in the heavy transport aircraft IL -76 upgrade. The main task of the system is to make the United States reconnaissance satellite failure. Kashin pointed out that in the new political conditions, when Russia and both countries have suffered from the growing pressure of the United States, the joint force development of laser weapon, for Russia and China is undoubtedly not only can save money and ensure its own security wise. At the same time, the high cost and limited number of laser weapons can also eliminate the possibility that the two countries can compete with each other in the global arms market.

1. http://lasernzh.bandzoogle.com/home
2. http://www.rezeptefinden.de/r/htpow-5000mw-laser-pointer-93171054.html