metiscn

Effective support technology is a critical issue in tunnel construction. It is very necessary to popularize and apply an anchor system with simple operation and high anchoring quality. Self drilling anchor bolt has the functions of drilling, grouting and anchoring. It’s a kind of advanced anchor system, which can solve hole collapse problem when drilling and ensure the grouting effect under the complicated geological conditions. Self drilling anchor bolt can be arbitrarily cut, jointed, pre-stressed and release load, which has a great application value.

At Metis, we are an experienced distributor of many types of self drilling anchor and other important products. With an expansive range covering over a dozen product categories, we have made ourselves into a convenient, single-point source for these important products.

The function of a self drilling anchor is to provide anchorage of a structure to a solid substrate – either through active pre-tensioning of the ground anchor to the anchorage zone, or through passive anchorage via low lock–off loads (e.g. rock bolts). The main components of a ground anchor are the bonded length, free length and the anchorage.

Metis provides a variety of specialty self drilling anchor bolts, fittings and mill products customized to your exact specifications and requirements.Metis takes pride in the quality of our products.

At Metis – we pride ourselves on leading the way in delivering the best self drilling anchor solutions for our clients’ ground engineering challenges, on time, to budget and most importantly, safely.

Anchor bolts are extensively applied in structure of founadtion pit support，which mainly make use of anchor-hold in the layer of soil in order to maintain the stability of structure.While based on complex geological conditions, the security and supporting effect are more important, so anchor bolt system is quite necessary.

Based in China, we help our clients deliver projects across the full spectrum of industrial, commercial, environmental, mining and infrastructure sectors in China and all neighbouring countries even other mainlands.

We combine local knowledge with the international experience of Metis, the world’s largest specialist ground engineering contractor, which developed many of the ground engineering techniques used widely in the construction industry today.

http://metiscn.fishinblogs.com/2016/10/11/metis-is-one-of-the-trusted-names-involved-in-manufacturing-variety-of-standard-and-special-grade-self-drilling-rock-bolts/

Metis has all the self drilling rock bolts you need to ensure that everything is securely held in place. We have a great selection of rock bolts for common engineering applications. We have a wide selection of rock bolts for different applications and available in several different materials.

Metis is the professional anchor bolt manufacturer for Hydroelectric Projects.Metis,engages in the manufacture and sale of anchor bolt,we are your best strategic alliance partner as we provide the best quality, as well as the most added value.Metis is continuously developing its technology and improving its products.Today,our products are also favored and appointed to be used in most of world largest structures around the world.Metis – We also offer our clients efficient and reliable production processes.

Metis- Our SDA bolt products are sold worldwide and are regularly specified by architects and structural engineers for load critical applications and high profile domestic and international projects. We distribute next day for stock items on our own vehicles and through national and international carriers, direct to site, for the construction and civil engineering industries both globally and throughout the China.

http://metiscn.fishinblogs.com/2016/09/12/self-drilling-installation-utilization-of-the-anchor-bar-as-drill-rod-with-a-single-use-drill-bit/

Metis offers a complete range of tools for drifting and tunneling projects ranging from mining to dams and other civil engineering projects. Select the Metis anchore bolt system that you want to integrate into your drilling operation, or choose the individual component that completes your current rock drilling system.
Our drifting and tunneling tools include self drilling anchor bolt in different lengths, drill bits, couplings, and reaming equipment.
We are a trusted name engaged in dealing qualitative SGS anchor bolts as per client’s specific requirements. These are available in various grades, thickness, length and weight.
On this site you can find products and technical assistance, request samples or volume quotes, and order items from our comprehensive stock. If you prefer personal assistance please contact us. Our attention to quality, service and timely deliveries make us the best choice for your anchor bolts needs.

http://hostedpbxinfo.net/the-self-drilling-anchors-you-receive-from-metis-should-be-high-in-quality/

Metis stands out from other anchor bolt manufacturers rapidly these years. We are a professional anchor bolt manufacturer, which has the ISO 9000 quality certification and CE certification. It’s mainly used in the mineral exploration, tunneling and slope stabilization project.

Metis self drilling anchor bolt system are built from top quality materials, guaranteeing high strength and durability to stand up to the toughest environments.Metis self drilling anchor bolt systems are the unsung heroes of most fall protection systems,often overlooked but critical components because they securely attach your system to the anchorage.

The majority of our anchor bolt system originates from our own production and is distributed worldwide. Thus, we can react to our customers’ wishes in a fast and flexible way at all times, always maintaining our high quality standard.In order to guarantee a just-in-time delivery, we have optimized our logistics: The complete processing from inquiry to delivery is carried out within 24 hours.

http://metiscn.fishinblogs.com/2016/08/16/metis-owns-professional-processing-equipment-and-more-than-ten-independent-production-lines/

Metis insist on the attitude of high-quality, high-service and advanced construction equipment to provide systematic solutions for global projects. Especially for the construction trades, security and quality are in the premier position. Self drilling anchor system is globally recognized secure supporting method and has applied in several projects with different geological conditions. If anchor bolt system is used in Nam Ngum Ⅲ Hydropower Station, it will not only improve the quality of project and decrease damage, but also extend its lifetime.

At about the early 20th century, self drilling anchor had been developed and employed. So far, many countries and regions have formulated standard and specification of it. It is widely used in mine roadway, railway tunnel, highway tunnel and drainage tunnel, etc. Recent years, with the rapid development of high-rise buildings and railway engineering, the technology of self drilling anchor is widely used for reinforcement in foundation pit, slope and landslide, etc.
Adopting the method of self drilling anchor with sprayed concrete, drilling, grouting and anchoring function can combine together, safe, high-efficient and easy to operate.
Building railway network, tunnel construction is quite convenient for saving cost. And self drilling rock anchor is an efficient way to reinforce structures. It combines drilling, grouting and anchoring together, bonds to soil layer, stabilizes stratum and then reaches to the effect of supporting projects.

http://metiscn.fishinblogs.com/2016/08/06/metis-a-self-drilling-anchor-bar-distribution-company-with-locations-throughout-the-china/

Metis self drilling anchors are generally used when there are difficult ground conditions, such as natural or man-made obstructions, sensitive ground with adjacent structures, limited access/low headroom and/or karstic geology. They are commonly used to replace deteriorating foundation systems, for the renovation of structures, to support structures affected by adjacent construction, for seismic retrofitting or in-situ reinforcement including embankment, slope and landslide stabilization.

Self drilling anchor system is the rock and soil reinforcement rods structure. It is one of the main supporting forms of rock slope for underground,plays an important role on stability of civil engineering maintenance, especially it has obvious effect in the joints and fissures in rock mass and anchor rod on rock reinforcement.

We are a nationally-renowned geotechnical engineering and construction firm with more than 10 years of experience.Effective management of health and safety, environmental, ethical and other social responsibilities (described together here as ‘social responsibility’) is fundamental to our duty of care. Our Management’s role is to provide effective leadership, establish overall policy for the company and monitor the performance of the operating units in relation to social responsibility. Line management is charged with delivering performance that is socially responsible, supporting company policy and providing leadership within their business. All employees are responsible for following company policy with the support, direction and commitment of management. Metis promotes honesty, fairness and integrity in our relationships with employees, customers, suppliers, competitors and the community/environment.

http://hostedpbxinfo.net/self-drilling-rock-bolt-is-a-new-anchoring-method/

Metis controls all aspects of our product integrity including rock anchor design, anchor bolt building, quality control, research & development, sales and administration. Metis’s policy is to have sound business fundamentals and efficient process controls.
Metis is the leader and industry innovator in self drilling rock anchor.Our high quality products have enabled us to become the number one provider of rock anchor products to the mining,tunneling,hydroelectic and civil construction markets.
Metis offers an expansive product line about rock anchors,such as self drilling rock anchor,stainlessanchor bolt system and so on.We understand that it can be a pain searching from company to company to find the right product for the job, therefore it is important for us to always develop and expand brands and products in order to make your life easier. Our current product line consists of over 60 items available in hundreds of sizes.
We’re not successful unless you’re successful! That’s why we have Regional Sales Managers located throughout the CN to provide your business with the training and information to reach optimal sales.
With the Metis brand, you are assured of product performance, strong marketing, and support programs that only Metis can provide.

At Metis, we specialise in the manufacture and supply of high integrity special anchor bolt. We make customer satisfaction our priority, with quality, competitive pricing, and on time deliveries being our focus. This, combined with a wealth of international experience, will ensure that our multilingual sales force can offer a quick and reliable service, whatever your requirements.

In order to achieve high quality anchor bolts,we conduct rigid quality control on each production process. Our SDA bolts are made of high quality materials, and we use advanced production equipment and technologies. Our talented team of engineers designs and develops new drilling tools, while we can also produce anchor bolt according to customers’ specific requirements. Now, our company is approved by ISO9001:2008, and our anchor bolts are popular among clients at home and abroad.

Our goal at Metis is to provide our customers with the highest quality and service in a timely and efficient manner. Therefore, our innovative ideas are directed to continuous improvement and simplification for our customers. We are constantly developing new technology to help our customers find solutions for their fastener needs.

Metis services are fully qualified and have the relevant long term experience to provide the full design and installation package for all your self drilling anchor and ground anchor requirements.

The Metis anchor bolt system is a self-drilling ground control solution used in Civil Engineering and Underground Construction. It features a wide range of applications such as soil nails,micropiles,rock bolts, or ground anchors.Installations in weak ground and under unstable borehole conditions represent no difficulty and are ideal for the application of the Metis anchor bolt System.

The entire rang of products are entirely manufactured by our expert professionals by making use of latest technology and advance tools&machines for the advancements of all our products .We have Tensile Testing Machine to test the bar quality,so that to guarantee all of the products delivered to customers are qualidied. Available in different sizes and specifications,our products are extensively appreciated for their durability,seamless finishing service life.